If i got it right, just like any other feature it can be added to what ever stage map you want it right? Looking forward to add 'fans' controle on. Set all columns to 14.3 for stock, set all columns 191.3 for disabledĭisable/Enable Cylinder Deactivation / Half Engine Mode / 4cyl modeġ) Factor for limiting permissible torque range for HEM operation from drivability point of viewĬode: -3.8 -6.0 -7.5 -13.5 -19.5 -21.0 -27.0 -30.0 -31.5 -33.0 -34.5 -35.3 Note: Be sure to follow your local emissions laws for road use.Ĥ) Minimum relative air charge for catalyst diagnosis Follow prompts to complete the flash and clear the codes when complete.ĭisable/Enable Ethanol Sensor CEL and Content Value Resetġ) CAN ethanol error timer (ms): Time before CEL for missing e85 sensor.Ģ) CAN ethanol reset interval(ms): Time before ethanol content is reset to 0 for missing e85 sensorĮnter time in ms before CEL and/or content is reset to 0 in the DS1ĭisable/Enable Downstream o2 sensor readiness The DS1 will give you an error on upload if you don’t name the file properly.Ĭlick "Choose File" from the DS1 File Tab, select your Bin and click OK.įrom the ECU Tab, Click "Cal Flash." and select the file you uploaded. Once your done editing, use the save button to save the changes to the bin you loaded in Step 3 (2b).īe sure to name the file starting with “MED17_1_1”. Step 4: Saving your Bin, loading, and flashing with the DS1
Optional: If using the Compare feature, Load the bin you want to compare to.4) In the Parameter Tree window, set View By to Parameter Category to see the parameter groupings shown below
0 kommentar(er)
